Workshop

Below is information & pricing for services that we offer as well as a guide to costs for individual jobs.

Bookings are essential for the workshop. However smaller jobs such as a tyre or tube replacement can quickly and easily be performed on the spot whilst you wait. Once a job is booked in and we have your bike, the repairs will usually be completed on the same nominated day. To make a booking please call either store to arrange a date that suits you.

Service rates:

Basic Service - $80 Major Service - $150 Ultimate Service - $250
  • Gear tune
  • Brake adjustment
  • Check spoke tension
  • Check bolt tension
  • Lubricate chain
  • Check bearings
  • Wipe down frame, fork & wheels
  • Intensive inspection of frame & components on the bike

Recommended every 3-6 months.

Includes Basic Service Plus:

  • Drivetrain degrease (chain, cassette & chain rings)
  • Wheel true (front & rear)
  • Basic clean of front & rear derailleurs.

Recommended every 6-9 months.

Includes Major Service Plus:

  • Removal of all components for: Degreasing, lubrication of all moving parts, thorough frame detail and clean, bottom bracket, headset & wheel hubs service.

Recommended every 12-18 months.

Individual labour costs:

Brakes Electronic Drivetrain
Adjust brake/install 'V' pad $15 Gear tune Shimano Di2 $40
Adjust brake/install canti pad $20 Gear tune Campag EPS $50
Adjust brake/align/bleed disc brake $35 Gear tune SRAM Etap $40

Install disc pads & reset/align piston & caliper

$15 Install Shimano Di2 groupset and tune $250
Install hydraulic line $25 Install Campagnolo EPS groupset and tune $250
Trim hydraulic line $15 Install SRAM Etap groupset and tune $250
Install 'V' brake $20 Software update for Shimano Di2 $50
Install caliper brake $20
Install cable disc brake $25
Install disc brake without bleed per end $25 Headset
Install GYRO (BMX) $80 Headset adjustment $15
Install brake cable & adjust $25 Headset installation $35
Install brake levers & adjust $30 Headset overhaul $35
O'Haul brake lever - disc/caliper $50 Face headtube (frame only) $40
Drivetrain Handlebars
Drivetrain clean including gear tune $80 Install bar tape $15
Adjust BB (with lock ring) $20 Cut down handlebars $15
Install cartridge BB with cranks $35 Install MTB hadlebars $25
Overhaul cartridge BB $35 Intstall grips $10
Install BB onto bare frame $20 Install bar ends $10

Face BB & chase BB threads

$50 Install road handlebars $45
Install 1/2 or 3 piece cranks & BB p/hr Install headstem with removable face plate $15
Install chain rings (each) $15 Install aero/tt bars p/hr
Install chain $15
Install cassette/freewheel $15 Forks
Install/remove pedals $10 Cut steerer $25
Fork installation $45
Gears (cable) Fork & headset installation $60
Gear tune (per end) $15 Install star nut $15
Install shift cable & adjust $20
Install shift cable & housing plus tune $30 Suspension
Install STI shifters & adjust $80 Fork service open bath air/oil $100
Install MTB shifters & adjust $60 Rear shock service, air sprung $60
Install derailleur & adjust $30 Rear shock service, coil sprung $150
Straighten & align rear derailleur hanger $15 Overhaul of pivot points & or bushings on frame p/hr
Fork lower leg refresh $50
Wheels Install rear shock $15
Glue tubular tyre $60
Install tyre/tube per end $10 Recycling/disposal fees
Install/setup tubeless per end $15 Tyre, fork oil, brake fluid, rear shock oil $3
Install rear wheel/swap cassette $20 Tube $1
Hub bearing adjustment $20
Coaster brake hub overhaul $80 Warranty charges
Wheel true (per wheel) $30 Frame swap $200
Wheel build (starting from) $80 Frame swap with parts clean $250
Spoke calculation $15
Install spoke & true wheel $35
Miscllaeneous
Baby seat installation $35 Bike clean $25
Installation of rear pannier rack $30 Box bike for travel/freight $60
Installation of cycling computer $20 Adjustable height MTB seat post with internal cable routing installation $45

 

Hourly Labour Rate $100

Costs include cleaning products, lubes & some oils.
**All prices are estimates only and will be subjected to each individuals requirements